s_banner

Products

Fiberglass assembled panel roving

Short Description:

◎ Good antistatic property

Fiberglass Roving for FRP Panel has good yarn dispersion under certain tension conditions

◎ Panel Roving has good penetration and excellent shredding

◎ E Glass Panel Roving has excellent mechanical strength

◎ Good resin refractive index matching, very fast penetration

We also have rovings for many other uses and properties: Assembled Roving for SMC, Fiberglass direct roving for weaving, Filament Winding Roving, Roving for Pultrusion, spray up roving, Fiberglass Roving for FRP Panel, etc.


Product Detail

Product Tags

The product is a ply-twisted roving for continuous sheet forming process, and the surface is coated with a silane-based sizing agent. Suitable for reinforcing unsaturated polyester resin and acrylic resin.

The product has a fast penetration speed, and has excellent short-cut dispersion under low tension. It is suitable for making high-performance lighting boards and building boards

512-(1)

Specification

Model Glass type Sizing type Typical filament diameter (um) Typical linear density (tex)
ER-838

E

Silane

12 2400 、3200 、4800
ER-872 12 2400
ER-872S 12 、13 2400 、3200 、2400

Technical Parameters

Model Linear density variation(%) Moisture content(%) Sizing content(%) Stiffness(mm)
ER-838

± 4

≤ 0.07

0.55 ± 0.15 120 ± 20
ER-872 0.60 ± 0.15 115 ± 20
ER-872S 0.60 ± 0.15 125 ± 20

Instructions

◎ Store in the original packaging before use, do not open it before use. This product is best used within 9 months.

◎ When using the product, be careful not to damage or scratch the product.

◎ Pay attention to the influence of the temperature and humidity of the environment on the product. You can adjust the temperature and humidity of the environment properly before use, so as to achieve the best use effect.

◎ When using, please control the tension reasonably to ensure the continuous and uniform tension.

◎ Regular maintenance of tools, such as knife rollers, top rollers, etc.

SMC

Packaging

Glass fiber roving products are packaged in wooden pallets, the middle layer is separated by cardboard to prevent the product from being scratched, shrink plastic film is used, and the outermost layer is packaged with stretch film.

Storage

Under normal circumstances, please store fiberglass products in a dry, cool environment to prevent the products from getting wet. The best temperature requirement is -10℃~35℃, and the relative humidity requirement is ≤80%. To ensure product safety, the pallet stacking height should not exceed three layers, please operate it correctly.


  • Previous:
  • Next: