s_banner

Products

Fiberglass roving for pultrusion

Short Description:

◎ Process performance, excellent banding, less hairiness

◎ Suitable for a variety of resin systems, the penetration effect is fast and complete

◎ The product has excellent mechanical properties and good thermal bending resistance

◎ Excellent chemical resistance

◎ Excellent electrical insulation properties of products

◎ Excellent acid corrosion resistance and very good aging resistance

◎ Suitable for various pultrusion processes


Product Detail

Product Tags

The product glass fiber roving is produced with E glass formula, which is suitable for reinforced unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin and other thermosetting resin systems.

Has good versatility. It can be used in winding forming process, especially suitable for high-speed, high-tension pultrusion process.

Products are used in the manufacture of tent poles, outdoor travel products, pressure vessels, pipes, boats, chemical Industrial storage tanks, wind blades, geogrids, fiber optic cable reinforced cores, UHV and UHV power transmission, substation and other fields, cable trays, pultruded profiles, high-speed rail sleepers and other fields.

Roving-5

Specifications

Model Roving type Glass type Sizing type Typical filament diameter (um) Typical linear density (tex)
ER-276

Assembled Roving

E

Silane

13 、16 2400 、4800
EDR-310H Direct/ Assembled 17 、24 1200 、2400
EDR-312  

 

Direct Roving

13 、16 、24 、31 100、200、300、400、2400、4800
EDR-312T 17 、21 、23 、24 、31 、32 1200、2400、2000、4400、4800
EDR-316H 13 、17 300 、660 、600 、1200
EDR-332 17 、24 、31 600 、1200 、2400、4800
EDR-386H 13 、17 、24、31 300、600、1200、2400、4800
EDR-386T 13、16、17、21、24、31 200、300、400、600、1200、2400、4800

Technical Parameters

Model Moisture content(%) Sizing content(%) Breakage strength(N/tex) Tensile strength(MPa) Tensile modulus(GPa) Shear strength(MPa) Bending strength(MPa) Bending modulus(GPa)
ER-276

≤ 0.07

0.55 ± 0.15 ≥ 0.40 / / / / /
EDR-310H ≤ 0.10 0.55 ± 0.10 ≥ 0.40 (<4800 tex)
≥ 0.30 ( ≥ 4800 tex)
2316 81.2 / / /
EDR-312 ≤ 0.10 0.60 ± 0.15 ≥ 0.40 ( ≤ 4400 tex)
≥ 0.30 ( >4400 tex)
2513 82.0 67 / /
EDR-312T ≤ 0.10 0.58 ± 0.10
0.70 ± 0.15 (17600 tex)
≥ 0.40 ( ≤ 4400 tex)
≥ 0.30 (4401~9600 tex)
≥ 0.25 ( >9600 tex)
2265 81.17 / / /
EDR-316H ≤ 0.10 0.40 ± 0.10 ≥ 0.40 2453 82.0 / / /
EDR-332 ≤ 0.10 0.45 ± 0.15 ≥ 0.40 (<4800 tex)
≥ 0.35 ( ≥ 4800 tex)
/ / / 1400 50
EDR-386H ≤ 0.10 0.50 ± 0.15 ≥ 0.40 (<17 um)
≥0.35 (18~24 um)
≥ 0.30 ( >24 um)
2765 / 2682 81.76 / 81.47 / / /
EDR-386T ≤ 0.10 0.60 ± 0.10 ≥ 0.40 ( ≤ 2400 tex)
≥ 0.35 (2401~4800 tex)
≥ 0.30 ( >4800 tex)
2660 / 2580 80.22 / 80.12 68.0 / /

Instructions

◎ It should be stored in the original packaging before use. This product is best used within 12 months.

◎ When using the product, pay attention to avoid product damage, rubbing, etc.

◎ Properly control the ambient temperature and humidity during use, and adjust the temperature and humidity of the yarn before use to balance the ambient temperature and humidity.

◎ Please control the tension reasonably and ensure the uniformity of tension when using.

SMC

Packaging

Glass fiber roving products are packed in wooden pallets, the middle layer is separated by cardboard to prevent the product from being squeezed, and shrink film is used, and the outermost layer is packed with stretch film.

Storage

The best storage conditions for this product are -10℃~35℃, relative humidity ≤80%. To ensure safety, product pallets should not be stacked more than three layers. Please move the upper pallets correctly and smoothly when stacking.


  • Previous:
  • Next: